THE ULTRA CLAY MITT 22 X 14.5 CM
The ULTRA Clay Mitt helps maintain a clean & smooth surface! An evolution of the clay bar!
- USE BEFORE WAXING, BUFFING, & POLISHING
- TRULY CLEANS & SMOOTHS THE FINISH
- INCREASES GLOSS, DEPTH, & SHINE
- HELPS WAX & SEALANTS LAST LONGER
DIRECTIONS FOR GENERAL USE:
1. Wash vehicle to remove loose dirt and debris
2. Spray Optimum No Rinse (560ml to 3800ml) on a small section of the vehicle (Alternatively, you can use your preferred clay lubricant)
3. Gently rub the Ultra Clay Mitt over the lubricated area until contaminants are removed and surface is smooth. Wipe area with a Microfiber Drying Towel. Continue in sections until the vehicle is fully decontaminated
4. Follow with Your Favorite Wax, Sealant, or move onto compound/polish Prior to initial use rub the Ultra Clay Mitt on glass using clay lubricant. Inspect surface of the Ultra Clay Mitt before and during use. To clean the clay surface, spray clay surface with lubricant and wipe gently with hand. After repeated use, or if too much contamination is present, discard and use a new Ultra Clay Mitt.
* Do not soak in liquid
* Do not squeeze or wring out
* Do not store laying flat on clay media surface
* Do not store wet in air tight containers
USE BEFORE WAXING: to remove surface contaminants